ISSN2456-3315
Impact Factor10.57
UGC CAREApproved
Low Cost₹599 / $45
CrossRefDOI
ESTD2016
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS
Authors
Khemchand Mawle , Mukesh Dole
Keywords
Economizer, Thermal Performance, CFD, Steam / Flue Gases Inlet - Outlet Temperature, Steam / Flue Gases Inlet - Outlet Velocity
Abstract
An economizer is an accessory used with boiler to recycle or reuse the heat generated from boiler combustion and which improves the boiler efficiency. The hot outlet flue gases are reused to preheat boiler feed water. In present research the economizer is modelled and analyzed for its thermal performance. The software used is SolidWorks. Economizer is modeled with various fin shapes and changing radius. The aim is to improve heat transfer efficiency. Four different cases were taken and the CFD analysis is performed and results were obtained and compared for temperature flow trajectories- steam, temperature flow trajectories- flue gases, surface heat temp, velocity- steam, velocity- flue gases in this case.
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJRTI — journal style
"ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS", IJRTI - International Journal for Research Trends and Innovation (www.ijrti.org), ISSN:2456-3315, Vol.4, Issue 9, page no.70 - 75, September-2019, Available :https://ijrti.org/papers/IJRTI1909013.pdf
APA — 7th edition
Mawle, K., & Dole, M. (2019). ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS. International Journal for Research Trends and Innovation, 4(9), 70 - 75. https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013
MLA — 9th edition
Mawle, Khemchand, and Mukesh Dole. "ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS." International Journal for Research Trends and Innovation, vol. 4, no. 9, 2019, pp. 70 - 75, https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013.
Chicago — 17th, bibliography
Mawle, Khemchand, and Mukesh Dole. "ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS." International Journal for Research Trends and Innovation 4, no. 9 (2019): 70 - 75. https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013.
Harvard — author–date
Mawle, K. and Dole, M. (2019) 'ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS', International Journal for Research Trends and Innovation, 4(9), pp. 70 - 75. Available at: https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013
IEEE — numbered reference
K. Mawle and M. Dole, "ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS," IJRTI, vol. 4, no. 9, pp. 70 - 75, Sep. 2019.
Vancouver — biomedical
Mawle K, Dole M. ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS. IJRTI. 2019 Sep;4(9):70 - 75.
AMA — 11th edition
Mawle K, Dole M. ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS. IJRTI. 2019;4(9):70 - 75. Accessed at https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013
BibTeX — Zotero, Mendeley, LaTeX
@article{IJRTI1909013,
author = {Khemchand Mawle and Mukesh Dole},
title = {ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS},
journal = {International Journal for Research Trends and Innovation},
volume = {4},
number = {9},
pages = {70 - 75},
year = {2019},
month = {September},
issn = {2456-3315},
url = {https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - Mawle, Khemchand
AU - Dole, Mukesh
TI - ANALYSIS OF INDUSTRIAL ECONOMIZER WITH DIFFERENT FIN SHAPES AND SPECIFICATIONS
T2 - International Journal for Research Trends and Innovation
JA - IJRTI
VL - 4
IS - 9
PY - 2019
SN - 2456-3315
UR - https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013
SP - 70
EP - 75
ER -
Issue
Volume 4 Issue 9,
September-2019
Pages : 70 - 75
Other Publication Details
Paper Reg. ID
IJRTI_181002
Published Paper ID
IJRTI1909013
Downloads
205,646
Research Area
Engineering
Country
-, -, -
Published
September 2019
Published Paper PDF
https://ijrti.org/papers/IJRTI1909013.pdf
Published Paper URL
https://ijrti.org/viewpaperforall.php?paper=IJRTI1909013
About Publisher
International Journal for Research Trends and Innovation
Published by IJRTI (JW Publication)
2456-3315
ISSN
10.57
Impact Factor
2016
ESTD Year
Open
Access
Impact Factor 10.57 calculated by Google Scholar and Semantic Scholar.
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 10.57 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
UGC CARE Approved Journal — Transparent Peer-reviewed journal aligned with UGC’s 2025 suggestive parameters, with CrossRef DOI registration and Scopus Standard metadata on every published paper.
Licence
© 2019 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal for Research Trends and Innovation for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
