ISSN2456-3315
Impact Factor10.57
UGC CAREApproved
Low Cost₹599 / $45
CrossRefDOI
ESTD2016
Peer ReviewTransparent
AccessOpen
Submission: Always Open
Paper Title
Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications
Authors
SHWETA NANDKISHOR GODULWAR , Prof A.M.Shende
Keywords
Ceramic materials having melting points, Ultra- High Temperature Ceramics, The effects of sinter-additives and reinforcements
Abstract
Abstract: Ceramic materials having melting points higher than 3000 °C and suitable for structural applications at above 2000°C are commonly known as Ultra-High Temperature Ceramics (UHTCs). Over the last couple of decades, there has been a growing interest for UHTCs in general, and for the transition metal di-borides in particular, due to the increasing demands in hypersonic aerospace vehicles, atmospheric re- entry vehicles and energy applications. However, problems pertaining to sintering, moderate fracture toughness and experimental challenges associated with reliably measuring the elevated temperature properties, as well as the properties that determine the performances at the actual service conditions, have limited their widespread applications. This paper comprehensively reviews the various routes/techniques, including the advanced ones, as adopted for the synthesis and densification of the di- borides. The effects of sinter-additives and reinforcements on the densification, microstructure and various properties, including elevated temperature properties have been discussed in critical terms. Due attention has been paid towards understanding the challenges associated with the experimental measurements of the high temperature properties under extreme environmental conditions and the very recently developed techniques for the same. Some of the existing and futuristic applications of transition metal di- borides have also been discussed. Finally, the review concludes with an outlook towards some of the outstanding issues.
Full Paper, Downloads & Preview
How To Cite
Choose the style your journal or department asks for, then copy it. Every version below is generated from this paper's own record.
IJRTI — journal style
"Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications", IJRTI - International Journal for Research Trends and Innovation (www.ijrti.org), ISSN:2456-3315, Vol.7, Issue 7, page no.1155 - 1163, July-2022, Available :https://ijrti.org/papers/IJRTI2207182.pdf
APA — 7th edition
GODULWAR, S. N., & A.M.Shende. (2022). Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications. International Journal for Research Trends and Innovation, 7(7), 1155 - 1163. https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182
MLA — 9th edition
GODULWAR, SHWETA NANDKISHOR, and A.M.Shende. "Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications." International Journal for Research Trends and Innovation, vol. 7, no. 7, 2022, pp. 1155 - 1163, https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182.
Chicago — 17th, bibliography
GODULWAR, SHWETA NANDKISHOR, and A.M.Shende. "Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications." International Journal for Research Trends and Innovation 7, no. 7 (2022): 1155 - 1163. https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182.
Harvard — author–date
GODULWAR, S.N. and A.M.Shende (2022) 'Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications', International Journal for Research Trends and Innovation, 7(7), pp. 1155 - 1163. Available at: https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182
IEEE — numbered reference
S. N. GODULWAR and A.M.Shende, "Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications," IJRTI, vol. 7, no. 7, pp. 1155 - 1163, Jul. 2022.
Vancouver — biomedical
GODULWAR SN, A.M.Shende. Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications. IJRTI. 2022 Jul;7(7):1155 - 1163.
AMA — 11th edition
GODULWAR SN, A.M.Shende. Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications. IJRTI. 2022;7(7):1155 - 1163. Accessed at https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182
BibTeX — Zotero, Mendeley, LaTeX
@article{IJRTI2207182,
author = {SHWETA NANDKISHOR GODULWAR and A.M.Shende},
title = {Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications},
journal = {International Journal for Research Trends and Innovation},
volume = {7},
number = {7},
pages = {1155 - 1163},
year = {2022},
month = {July},
issn = {2456-3315},
url = {https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182}
}
RIS — EndNote, RefWorks
TY - JOUR
AU - GODULWAR, SHWETA NANDKISHOR
AU - A.M.Shende
TI - Research Paper On Analysis Of Ultra-High Temperature Ceramic Using CAD Tools for Aerospace Applications
T2 - International Journal for Research Trends and Innovation
JA - IJRTI
VL - 7
IS - 7
PY - 2022
SN - 2456-3315
UR - https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182
SP - 1155
EP - 1163
ER -
Issue
Volume 7 Issue 7,
July-2022
Pages : 1155 - 1163
Other Publication Details
Paper Reg. ID
IJRTI_183124
Published Paper ID
IJRTI2207182
Downloads
205,619
Research Area
Mechanical EngineeringÂ
Country
Yavatmal, Maharashtra, India
Published
July 2022
Published Paper PDF
https://ijrti.org/papers/IJRTI2207182.pdf
Published Paper URL
https://ijrti.org/viewpaperforall.php?paper=IJRTI2207182
About Publisher
International Journal for Research Trends and Innovation
Published by IJRTI (JW Publication)
2456-3315
ISSN
10.57
Impact Factor
2016
ESTD Year
Open
Access
Impact Factor 10.57 calculated by Google Scholar and Semantic Scholar.
An International Scholarly Open Access Journal, Peer-Reviewed, Refereed Journal Impact Factor 10.57 Calculate by Google Scholar and Semantic Scholar | AI-Powered Research Tool, Multidisciplinary, Monthly, Multilanguage Journal Indexing in All Major Database & Metadata, Citation Generator
UGC CARE Approved Journal — Transparent Peer-reviewed journal aligned with UGC’s 2025 suggestive parameters, with CrossRef DOI registration and Scopus Standard metadata on every published paper.
Licence
© 2022 — Authors hold the copyright of this article.
This work is licensed under a
Creative Commons Attribution 4.0 International License
and The Open Definition.
This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.
Disclaimer:
The content, data and findings in this article are based on the authors’ research and have been
peer-reviewed for academic purposes only. Readers are advised to verify all information before practical
or commercial use. The journal and its editorial board are not liable for any errors, losses or
consequences arising from its use.
Declarations
Funding
No external funding was received for this study.
Conflict of Interest
The authors declare that they have no conflict of interest.
Acknowledgements
The authors would like to thank the reviewers and the editorial board of International Journal for Research Trends and Innovation for their careful reading and constructive comments, and all colleagues who supported the preparation of this manuscript.
